DIY Fly Drying Wheel Tutorial

In my opinion, nothing beats the feeling of accomplishment of catching fish on flies that I make myself. My favorite flies for bass are poppers and my go-to fly for redfish has been my gold spoon flies. Both of these flies require time on a drying wheel to cure the epoxy correctly. These commercial drying wheels can be purchased from anywhere form $40 – $100. I was looking to make one on my own for about $15.

Here is how I did it:

First, I disassembled my broken dryer and took the wheel and foam (thin piece of plywood with foam glued on it so I could reuse it. Then I headed to the party store and purchased a disco ball for $15.

IMG_3213

The unit has a colored plastic piece that screws on to a round black base that is then attached to the bottom base that houses the motor. I then predrilled and screwed my old wheel to the round base and then screwed the bottom assembly to a piece of small plywood that I attached to a stand.

IMG_3215
You can see in this picture the small stand where I attached my plywood wheel (I even reused the screws that came with the rainbow light for this). I then predrilled holes on another piece of plywood and attached the base mount to it using the three screws from my old dryer. I made a quick stand for it and I was in business.IMG_3214
I even chose to keep the light which will come in handy when I’m not doing this in our kitchen (don’t tell my wife 🙂 ) You can see old drops of epoxy on the wheel from previous use. I hope this helps anyone considering making one of these. It was a lot easier to assemble than the first one I make years ago. Since it came with that plastic round base (the one that screwed to the plastic bulb assembly, it made the whole project so much easier.

Advertisements

Louisiana Fall Marsh Fishing…Kayak Style

Screen Shot 2015-11-22 at 9.15.44 PM

My absolute favorite time to get to the Louisiana marshes for some kayak fishing has got to be the fall. It’s a period of transition. The  cool fronts that we get down here send a message to the speckled trout to make their annual migration inland to the marshes where they spend the winter months “chilling” out until they are ready to make their run to the coast in late spring to begin to spawn. This time can be feast of famine, depending on that weather. A series of windy, rain weekends has put a damper on my fishing until yesterday.

Although I got a call from a buddy of mine who was going to join me saying that he had to bail (something about taking his mother out for lunch for her birthday), I was determined to take advantage of the only day when the wind wasn’t going to be blowing 10 – 15 mph for the next week (my Thanksgiving  vacation). I left Baton Rouge at 4 AM and was on the water by 6:15 in Leeville, at a favorite spot of mine that I hadn’t fished in two years. By 6:20, I was already getting blowups on a popper ! The speckled trout, aka, spotted sea trout, were feeding on small minnows we call “butter beans.” I don’t know the real name for them (they aren’t cocahoe minnows). They are small and are shaped like a butter bean.

Anyway, by 7 o’clock, I had four nice specs in my cooler and I had released 10 other undersized fish.

DCIM100GOPRO

I changed to a Lafleur Charlie under a VOSI and paddled to another of my “hot spots” where knew there would be bigger fish. I wasn’t disappointed. I caught some nicer fish and started culling out the smaller, 12 and 13-inch fish for the 14 inch and above trout.

DCIM100GOPRO

This fish went for the chartreuse Charlie under a VOSI

The fish stopped biting at around 8 so I moved on to some other spots to see if I could get them biting again. For about an hour or so, things slowed down a bit. I caught a bunch of undersized fish and only put one more in the boat. By now, I had about 15 trout in my ice chest so I knew the day was a success. Additionally, I had a 16-inch trout that I was going to submit to our CPR  tournament (which finishes up at the end of the month).

DCIM100GOPRO

16-inch trout on a charteuse Charlie

I then switched to a darker colored Charlie and it was on. Nearly every cast produced a fish. I told myself I would stop keeping fish at the “Cormier Limit,” a self-imposed limit of 18. After this, I would only keep fish larger than 14 inches. Well, as my luck would have it, I kept catching 14, 15, and 16 inch fish. I had promised one of my co-workers some fish, so I didn’t mind keeping the extra fish to clean. I tried switching flies to target redfish but I couldn’t get to the redfish without a trout hammering my spoon fly. I saw a couple of blowups on the bank near some grass that I thought were redfish so I cast toward the bank, only to have a big trout inhale it!

I continued to push-pole my way through the marsh looking for signs of redfish but the overcast sky, the high water, and the breeze were not going to let me target redfish this day. I did catch, tag, and release a 13-inch redfish that was chasing bait along with the trout. I finished the morning with a Louisiana limit (25), all on the fly rod. The Lafleur Charlie, a pattern developed by a fellow Red Stick Fly Fisherman, Mike Lafleur, was my most productive fly.

IMG_3212