Persistence Pays Off

Persistence Pays Off

After weeks of looking for an opportunity to head south to fish the rich marshes of southeast Louisiana and not having any luck, it finally looked like I was going to hit the jackpot with a “picture-perfect” day. Winds were forecast to be 5-10 mph, and the sun was going to shine brightly all day. Add to that, the temperatures were forecast to start in the low 40s and I had dreams of catching bull trout in deep holes on some fast sinking clouser flies. Insert dream sequence music here:

So, Friday night, I set my alarm to wake me at 3:30. I was packed, I checked my list twice to make sure I hadn’t forgotten anything, and I even slept on the sofa, so I wouldn’t wake my wife up when I got up. I was as giddy as a school girl (no offense to school girls). I tossed and turned all night and dreamed of what would be plan A, plan B, and heaven forbid, a plan C. I think I even dreamed about tying flies…all while I sang music in my head that we had rehearsed in class this week. There’s my tribute to Count Basie. All I’ve got to say is, thank God I can operate on little or no sleep 😊

At 3:30, my feet officially hit the floor and I was in my truck and on the road by 3:50. My excitement would build as I made the over two-and-a-half-hour drive to my plan A. The temperature on my car read 37 degrees and I saw nothing was a star-studded, clear sky. As I got closer to water (Highway 1), I noticed just how calm the wind was. The water was literally slick as glass and I began to wonder if I had packed my Victoria’s Secret, Amber Romance to ward off those nasty No-see-ums (biting midges that aren’t bothered by deet insect repellants). I pulled over at a gas station to empty my bladder and I saw that yes, indeed, I had remembered to pack it. Everything looked like it was going to be perfect!

I was greeted to one of the most splendid predawn sunrises ever. The colors, which were magnificent, reflected back on the smooth-as-glass water. I wanted to get a picture but I knew that there would be a lot of competition at my combat launch spot so I didn’t want to slow down and jeopardize my chance of being the first kayak on my favorite point. When I crossed the high rise overpass in Leeville, I noticed there was a slight chop on the water and I looked at my outside temperature gage on my truck, which read 48 degrees. I murmured to myself, “Where did that wind come from?” “What happened to my cold temperatures?” Then, I noticed a cloudy haze developing in the east. I thought, “that’s not good.” However, my attitude changed when I got to my launch spot when I noticed I was one of the first people there. I was shaking in anticipation as I tied on a deep water clouser. I paddled out to my point, dropped anchor and fished…and fished…and fished some more. WHAT?? Nada! I moved around and noticed a few other cars pull up and out came the roadside fishermen and a couple of other kayakers. No one stayed very long, no one caught a fish, and I decided to opt for plan B.

Plan B was to move further east and fish the marsh for redfish. Surely that haze was just fog and I was going to be able to sight-fish for Mr. Poisson Rouge. Well, of course, the haze never lifted and by now the wind was blowing 10-15. I push-polled my way through the marsh and spooked many redfish that surprisingly, were in fairly shallow water. After a couple hours of this, I was thinking about Plan C.

Those of us who fish the marsh know all too well the sign of a spooked redfish, drum, or sheepshead. They leave behind a ball of mud in their escape path. I kept seeing these balls and I decided to begin fishing points and cuts that looked fishy. I even tried casting to escaping fish but unless I was going to hook them in the butt, I wasn’t going to be successful. I was just about to head to the truck when I stuck a big girl. I was leaving a small duck pond and I saw a couple wakes about 20 feet in front of me. I waited for them to settle down and I made a cast out about 40 feet in some deeper water. That’s when my line went tight and I strip set the hook. I knew it was a big girl because she was dragging my kayak all over the place and she took me down into my backing twice. Not knowing how well it was hooked allowed me to play the fish for about 10 minutes before I noticed I was being pulled close to the stakes that hold down the power poles along the highway. I decided to put my stakeout pole in the mud and fight the fish from there hoping neither  the fish nor I wouldn’t get tangled in the barnacle-encrusted wire. My plan worked and a few minutes later, I had the big fish securely in my fish grips. I was able to get a few pictures and revive her before releasing her (she was full of eggs) to go make babies. I was reminded of a valuable lesson I learned a while ago. Never give up. Your next cast could be the cast to turn a skunk into a winner 🙂 GOPR0043.jpeg

 

 

 

Advertisements
The Perch Float Popper

The Perch Float Popper

I was asked by members of my fly fishing club at the high school to teach them to make some bass poppers. They wanted to tie something that they could use during the approaching bass spawning period. I started thinking about what I could teach them to do that wouldn’t a) break the bank and b) be easy enough for beginners to complete. I came up with two possibilities. The first was the Froggy Fly, which you can read about in my previous entry. The second was the “perch float” popper. So here is how we do it.

First, get a bag of Comal Tackle perch floats ($1.00 will make 8 poppers). For this tutorial, I purchased some with the slit already cut in them. You can purchase the others and cut your own slits (for your hook).
IMG_3430.jpg

I begin by lightly sanding the color off the corks. I guess one could just put a few coats of white spray paint but it may eat away at the cork. I don’t know because I haven’t tried that yet:
IMG_3431.jpg         IMG_3432.jpg

Next, I cut them in half with a hobby saw:
IMG_3433.jpg

After that, I do some more sanding and I create the head angle:
IMG_3435.jpg

Once I have the angle, I use a dremel tool to make a “cup” in each head. This helps with the pop when the popper is fished:
IMG_3436.jpg

Next step is to put a thread base on a Mustad 33903BR, size 2 kink shank popper hook:
IMG_3437.jpg

Once that is done, I glue the hook to the popper by using a super thin CA glue or a very thin super glue:

When the glue is thoroughly dry, I use a little water based wood filler (I use Elmer’s) to smooth out the hole where the hook was glued and then I use a bit to fill the hole in the perch float by the hook eye:
IMG_3440.jpg

When that is dry, I do a little more sanding and then I add about five coats of a white under-coat of hobby paint. Here I use a metallic pearl:
IMG_3441.jpg

Once that step is completed, it’s time to paint the poppers. You can use acrylic paints from a craft store or any other method you prefer. Here I used a COPIC sprayer. Eyes were added from stick ons that I had in stock, but you can paint them on using different sized nail and needle heads. Here are the poppers ready for a 30 minute epoxy coat:

Pictured next are the heads on a home-made dryer. You can use alligator clips to dry them but you have to flip them over every 5 minutes or so. I made this dryer for about $5 or $6 several years ago:
IMG_3444.jpg

Once the popper heads are dry, all there is left to do is tie in the tailing material. I used several different approaches here to show different styles and effects, all of which should catch fish:

 

 

 

A simple froggy fly that catches fish

I don’t tie foam flies very much anymore but when I used to, I would catch a ton of bass and bluegill on a “froggy fly” made of simple craft foam, a bit of bucktail, and some rubber legs. Recently, I taught some of the members of my fly fishing club at St. Michael High School how to tie this fly. It’s an easy fly to tie for beginners.

The materials are very simple:

Hook Gamakatsu 2/0 finesse wide gap hook 230412 or 230912 (weedless)
A small clump of bucktail
Thread (I use 210 denier for strength)
Rubber legs (use spinnerbait rubber skirts)
Craft foam (Hobby Lobby, Walmart, or Michaels

Recipe:

Start by putting down a thread base.

Then add small clump of bucktail and some of the rubber legs

IMG_3408.jpg

Cut the foam in a strip about width of the hook gap and trip the tip to make a triangle to have a tie in point.

IMG_3409.jpg

Work your thread to about an eye length behind the eye and tie down the foam.

IMG_3410.jpg

Then fold the foam back over itself and tie in the front rubber legs.

IMG_3411.jpg

Trim off the tail end of the foam to your liking, whip finish, and add a drop or two of some sort of head cement on the wraps and the underside to make it more durable.  Then use markers to make it look like a frog. IMG_3412.jpg